Комментарии:
Can you do this with your left joy con?
ОтветитьDang. None of this worked for me.
ОтветитьUmmmmmmm uhhh the problem is that my right side of my joy controller doesn’t work at all! How can I pressed the X even if it doesn’t work tho?
ОтветитьMy right joycon wasn’t working so I couldn’t hold x 😢
ОтветитьThank u
Ответитьlies
ОтветитьGoat fr
ОтветитьJust bought an OLED and started to freak out because I didn't buy a warranty and this video saved me thank you
ОтветитьTHX SO MUCH YOU GET A SUB!
Ответитьthe third one worked like magic and we used an air compressor.
ОтветитьIf it's disconnected we can't hold x.
ОтветитьCurrently on the step where I have to let it charge... I guess we will see the results in 3 hours!
ОтветитьThx for that my ninetdo switch controller was not turning on
ОтветитьThe 2nd method work for me
ОтветитьI did this the controller dosent pair 💀💀💀💀
ОтветитьMy gosh, you’re an lifesaver❤❤
ОтветитьW video worked easy.
ОтветитьVery useful, got me up and running again, thank you!
ОтветитьI am 3 years late but another solution I found that worked for me is isopropyl alcohol. Gently take apart joy con and use some on the bottom of the back joy con rail. If that doesn't work then try cleaning the inside bottom rail or the switch where the bottom of the joy con snaps into place (keep in mind that spot is hard to reach. If you want to clean it easily you may need to take your switch apart. I managed to clean it with a cotton ball an using tweezers to get them inside)
ОтветитьSimply watching this video randomly fixed my joy cons. I can’t thank you enough
ОтветитьNow my joy corn just won't reconnect
ОтветитьHey guys I’m having this problem too but can it be the actual switch.?
ОтветитьThank you so much this actually helped!
ОтветитьMy switch hasent been working for years but thanks to this tutorial it FINALLY WORKED I AM SO HAPPY TYSM!!!
Ответитьthank you, I appreciate it a lot
Ответитьthx first and restart work bro i have this problem for 2 years and but i can't use one controler now i can
ОтветитьI wanna break my right controller
ОтветитьNo fancy cars, no woman in stupid outfits, no flashy video. All Bars. 10/10
ОтветитьWhat if the right joycon is not charged and can't be used? There's no way to press and hold X. How to fix a discharged joycon please?
ОтветитьWhat if the joycon isn't working at all?
ОтветитьThanks!!!!!!!!
Ответитьthank you so much this actually worked😁
ОтветитьThe side that isn't working for is the left side. I tried you method and screwed my self more.
ОтветитьStep one worked the first try
ОтветитьI fixed my issue with your guidance. Thank you so much
ОтветитьThank you! I didn't even know my switch could restart!
ОтветитьOMG THANK YOU I've had this problem for soooo long thank you
ОтветитьThank you!
ОтветитьJoycons were a mistake.
ОтветитьI did the third method with WD40 and also notice at the very bottom in the groove of the slider for the switch theres a connection point were the joycons directly lines in to the switch. Cleaned that as well with the WD and we are brandnew again. I even did the to joints you gased I just WD though. FYI guess WD40 non-conductive and can even fix button issues. Thanks and cheers everyone!!!
ОтветитьOMG TYSM MY LEFT CONTROLLER WASNT WORKING (bc I dropped it on the floor) BUT NOW ITS WORKING BRAND NEW ❤❤❤😂😂😂🎉🎉🎉
ОтветитьThis wouldn't work when i vomited on my Nintendo switch
ОтветитьFixed itself when I pulled up the video. Guess it knows when I’m mad.
ОтветитьOh my gosh thank you I couldn’t get my joycon to work and I was about to throw it away thank you
ОтветитьThanks so much
ОтветитьWow the first already worked thanks!!! Usually nobody’s tutorials work for me
ОтветитьTysm
ОтветитьAbsolutely do not follow this use for compressed air. It is liquid fluorocarbon and while not very conductive its not 0 conductivity and can cause a short in the right scenario, it can do damage if you bridge contacts. It most likely won't but its also not going to help you. Blowing off anything other than the contacts is not much use. The contacts are on the bottom side of the rails on the switch and under the black plastic at the bottom portion of the joycon, no point in blowing out slots that have nothing to do with the connection. Use a brush to clean these contacts and if that doesn't work Nintendo offers free shipping and repair to fix your joycons. Dumb luck fixed this switch.
ОтветитьHow the hell do I press X if both of them are disconnected??? That doesn’t work and it doesn’t magically fix itself like other people are saying
ОтветитьBro it doesn’t work I try to but I can’t can I have any of my controllers now, but I’m so mad😾
Ответить