Комментарии:
Nice info, thanks
ОтветитьNever charge unmarked 18650 above 800mA. Best ideal charge current is 500mA. If you have proper branded 18650s with C rating then it's safe to charge with the given amps.
ОтветитьYou never actually show it charging
ОтветитьPlease stop teaching people stupid things. Charging batteries in parallel is a very bad thing. Also, 18650 are not LiPo.
Ответитьthanks for this useless video announing the next video.
Ответитьfell asleep formost of this
Ответить😵💫😬🤔😳🤯🧐🤨🤐WTF ❓❓❓❓
ОтветитьHave the exact same charger works perfectly charging my LI ion batteries (lipo 3.7v setting)and battery packs made up of li ion cells (they have battery management systems ) just set the capacity max before you charge and off to the races works perfectly. Haven't gotten the discharge function to work yet
ОтветитьDumb video
ОтветитьCan it charge a single cell with 3 amps? also, when i put 2 18650s then i set the current to 2 amps, so it can charge the batteries at 1 amps each right?
ОтветитьЧе за хуйня
ОтветитьCan i replace my old li polymer battery with lion lithium battery using same charger?
ОтветитьThis video is terrible and completely wrong. It will only charge at a constant current for so long and then it has its own charging algorithm built into the charger so you can't follow the manufacturers guideline. Buy a Li-Ion cell charger...you're gonna burn your house down. And you're charging current is completely wrong. If it was a constant current per the graph it said 0.6mAh.
DO NOT FOLLOW THIS VIDEO.
That took along time to listen to nothing of any interest, could be a political bloke
ОтветитьI have one like this and everything works except, charge in balance mode and balance battery . Work couple seconds and then on the screen at mah shows 0 and stay like this hours . In simple mode charge in series reach's at the end, but in balance mode charge or balance battery do nothing . You tasted yours it's ok ? Thanks
ОтветитьWrong. So wrong.
ОтветитьI have a 13s pack. Can I balance charge it with this 6s balancer?
ОтветитьWhy would you recommend people to parallel charge 18650’s?
With a charger like this you should wire the 18650 battery holder in series and add a JST-HX balance leads. This will allow all the cells to fully charge.
Charging in parallel like your showing wont charge all the cells to max cap because when the first cell reaches max cap charger will turn off leaving the rest of the cells only partially charged.
omfg this arabs constant swishing, lip smacking & gulping was infuriating.
Ответитьcan we charge them with imax b3 battery charger
ОтветитьYou should change battery type from menu. This is not lipo. As you can see at battery type menu, there are three different kind, lipo, liion and life. Lipo is 3,7v and liion is 3,6v
ОтветитьIdiot
ОтветитьHello. How can I charge lion cells to 4.1v not 3.6v ?
ОтветитьCharging these in parallel like this can cause a fire or explosion if they are not balanced, they will draw massive currents. This is a balance charger, why not use it as intended?
Ответить??? Lipo setting??
ОтветитьI have a ebike 48v battery well that charger work for that
ОтветитьI cannot believe you are telling people to charge lithium Ion batteries on lipo settings
ОтветитьIf you charge 18650 on lithium iron setting on charger cut of voltage is 4.10
Ответить18650 works the same as lipo
18650=3.2-4.2volt
lipo=3.2-4.2volt
with 18650 dont go over 1amp charge (???)
with lipo you can go 1C charge
WTH did I just watch. Damn lol
Ответитьwell that vid was useless...
ОтветитьYou had the setting in lipo not Li ion??
ОтветитьCharging li-ion cells with these charger : By default Li-ion menu isnt showing. Go user select program --> there will se Li-ion charge menu , select it and activate it there.
ОтветитьThank you for nothing more than your written explanations and behaviour plot inserted on the video, cause I feel I waste 8 minutes of my lifetime. Please, call things propperly, because this is most an unboxng than a way to charge li-ion batterys.
ОтветитьI can not deal with the smaking, its driving me nuts drink a glass of water or something.
Ответитьexample if 6 cells want to charge in Parallel what is the calculation ...?
for 1 cell required 4-5v 1amps then
if 6 cells volts , amps?
if 12 cells volts , amps?
kindly reply.
Thanks. Got my charger secondhand, and was trying to charge tool battery packs without the instructions to the unit. The press-and-hold ENTER at the end of the programming had me. She rollin now
ОтветитьAny thrift store....old Xbox 360 power brick is 12v16a. All you need and more.
ОтветитьI cannot watch another second of this shit. Call most informative, completely cancer
Ответить18650 are not lipo, they are li-ion 3,6 volts
ОтветитьHow i know my 186500 cell is good or damaged?
Ответитьthank you that is a very clear explanation for someone that has never used the imax b6 before.
I am trying to charge some Makita 18v batteries that have discharged too low for the Makita charger to work. (12v )
I am assuming that I can charge the 1500 mAh 5S cell pack at 0.5C safely yes ?
Just to let you know, that is not a Genuine one .
ОтветитьΈλληνας το κόβω τώρα.
ОтветитьThe fact that i can hear you swollow and hear the spit in your kouth is going to make me not like. That shit bugs me so much
ОтветитьIi expected an explanation how to charge 18650 instead I lost time listening that your charger needs a power supply.
ОтветитьThanks man good video.✋
ОтветитьWhat about the Balance? if you charge more then one
Ответить