If Span is 8 Meters b/w Two Columns Than what should be the depth of Beam?How to Find Depth of Beam?

Please tell where you are getting formula? Because i seen a formula...
Depth of beam=L/10 ; Width of beam=L/12. For a 2 floor building but the L should not be greater than 6meters.

Hindi mai banao iss video ko

His value is bottom size or including ( Lenter ) RCC slap

I am looking for someone who can provide full report for Steel Structure - 700 sq Feet G + 3 Storey

Does it apply in drop beam also r only great beam

When do you use D=L/16? You have used this in previous videos.

On which basis you say that..? What types of code you are following..?? Also mention the code.. It is just only time wasting

Good morning Engr. Is it possible to construct a beam, 12 meters in length between two columns using I-beam for a two storey house?

Using what material?

if is code is not safe for 8m span.. who the hell designed this is code

as a general rule divide the span by 15

Dear admin I thing you have not enough capability to answered all the comments give below 👇👇👇👇

Dir, you said the beam depth is 8000/20= 400mm,, my question is ,,
Is this 400 mm beam including with slab thickness ?? or it is excluding slab thickness...

Sir , this 600 mm beam that you said,, is it including slab or excluding slab ??

You deserve super like & admire

Please what do you mean by depth of beam.

Bobo

Good👍

A good soil condition..I have to built a 4 story house...my architect designed 20feet beam ...our constructor planning to use 20mm 4 steel bars...also colum with 16mm 4 steel bars and 10mm 4 steel bars..is it safe..

For 10 meter span ,what will be the depth and width...??? Is it possible to make beam for 10 meter length ( simply supported)....???

If d distance between two columns 6mtr
What should d columns size is

I need sami sir's mail il, plz

Salam , can we mix between column for example en the center diffrent from the other.

Fixed beam?

I was wondering if you could do a video on depth of continuous beam. Thanks.

अगर ग्राउंड फ्लोअर के हॉल की साईज 21 बाय 10 हे तो कॉलम और बीम की साइज क्या होनी चाहिये

hello sir If my span is 10 meters between two columns can I use trussed beams ?

L/20 is for steel beams such as I/H beams. For steel-reinforced concrete beams, it should be L/12 or L/15 as minimum. I am not a civil engineer, but that is what I've come up.

This my case domestic building kindly send your mobile number 🙏

My question is for span of 7.6m in your earlier tutorial you said for span of 7.6m beam btw two columns the column size will be 400mm x 400mm and that the depth of beam is 7.6m/16. How come in this tutorial you said the depth of beam will be span/20 instead of span over 16. And if 7.6m span the column size is 400 x 400 I am thinking 8m will be 421mm x421mm taking reference from your previous lecture on 7.6m span

Asalamualaikum brother..
It is Hafiz Adnan from Kashmir (Jammu and Kashmir)
Hope u will be doing fine
Firstly u used L/d formula for calculation of effective depth of beam
Then u said I can bet that it will fail in very first trial...
Then how can i myself decide

I am confused cuz in other codes it says the depth of beam should be for simply supported SPAN/12 instead of SPAN/20

thanks for the support and education

Thank you Sir so much 🙏🙏

Hi bro make a video on 30 foot span for commercial building
With column size and etc

Super... you are my favourite teacher sir...

This is very basic but helpful video ...Good Explanation .

HELLO FRIENDS & ENGINEERS , IT IS A GOOD AND HELPFUL VIDEO .

Is this formula used in the actual job setting? You said the final depth will still depend on the loading carried by the beam. Won't this require software like etabs or staad?

What about the steel size, number of rods, cover & stirrups Spacing & dia

♥ U Sir,,,,, From Bangladesh,,

How about the width of the beam? You only discussed depth

How about length of beam is 8m but existing column is flush in the wall size 20*60. Is the column ok?

Assalamualaikum sir can u teach us the surveying also please

hello
sir
sir kiya aap autocad complete tutorials series bana shakte hooo please
thank you

Why it is not 400 mm depth according to d formula......

sir can you please explain singley and doubley reinforced beam.. and also axial and biaxial column...

Sir issme modification factor use
nahi hoga kya