Beginners guide to 3D printer slicers

dam...the intro was my initial question! great hook!

AWESOME VIDEO but an update to include Creality would be great too

I don’t care about what it’s doing or how it works, I just want to know how to use it!

IM SO HAPPY THAT YOUR AUSSIE 😂😂😂

Great reference and comparison video. Liked and subbed.

If anyone can help me would greatly be appreciate I’m still trying to figure out can we just use a regular usb drive or do we need the other kind and I’m still having trouble turning stl files into gcodes

I had a bad luck of buying a used 3D printer based on smoothieware and MKS board which are known for high risk of dead Ethernet connection.

how much electricity does it use

The mighty car mods t-shirt though😂😂😂 👍👍

Great video! Extremely helpful! Your videos as so easy to follow (love the pause button) and clearly explained. Thank you!

"Beginner"

Thanks!

Love this thank you for your thoroughness

You are brilliant mate. So professional and helpful

Thanks a lot... Very good summary for starting work with Slicer software

I guess you could say that's Michael's law 😄

I just got my ender 3 pro v4 and I can't find a slicer site I went to a few but they all want me to register for school can you show a video of how to actually download the slicer site please

you are apparently the go to guy for info on 3D printing😉

aWESOME !!! THANK YOU !!

New to printing. I definitely learned a lot from this video.

I have a flashforge printer I just got. I have been using their software for slicing. Should I use a different software or are most the same?

Good video, thanks.

Thank you Michael! I’m am FAR from tech savvy, but really want to get into 3d printing. I appreciate this video and will check out more of your beginner friendly videos

Thanks for sharing this video

cannot thank you enough. Clear language at the right speed without waste of time. thumbs up.

I have cura but it insists in print from the top to bottom. It is driving me mad please help

What about resin printers? I hear Chitubox and Lychee mentioned all the time

Excellent. Why is the Z axis designated as "E" in the G code?

Amazing tutorial. Congratulations

freaking awesome video. Though it was very basics of the 3 different slicers, u gave a great overview explaining what each setting does and how it effects the prints. Great work. I love watching your videos as they are clear and quite detailed and easy to understand.

freaking awesome video. Though it was very basics of the 3 different slicers, u gave a great overview explaining what each setting does and how it effects the prints. Great work. I love watching your videos as they are clear and quite detailed and easy to understand.

freaking awesome video. Though it was very basics of the 3 different slicers, u gave a great overview explaining what each setting does and how it effects the prints. Great work. I love watching your videos as they are clear and quite detailed and easy to understand.

freaking awesome video. Though it was very basics of the 3 different slicers, u gave a great overview explaining what each setting does and how it effects the prints. Great work. I love watching your videos as they are clear and quite detailed and easy to understand.

Do you know how to use this with an any cubic mega pro and a imac

This is highly interesting and very helpful, thank you! 👍🏻
I will have to check out your guides and expect them to be as useful and easy to follow as all your other videos, great work.
I didn't 3d print for quite some time now but with your content as a little refresher I guess tweaking will be fun and results should be better than before 😎

Great information video! Thanks!!!

How fix z axis during printing is far on bed
but in leveling and homing is exactly good

I've switched to Super Slicer. It's calibration section is outstanding.

I started with, and up until yesterday, used Cura. My prints have always been, after the initial learning curve, as close to perfect as my printers will allow.
But, Super Slicer is going to be fantastic.

Please make a video about what it can do!?!!

can you please help setup prusa slicer for dremel 3d45 printer please and thank you

Love that MCM shirt

💕👌👍

for beginner this video is confusing to see different software at once

Thanks mate awesome tips and help there for all levels of 3d printing.

Thanks for this video. I'm a total novice with 3D printing, and this video was very helpful. Thank you!

CR 10S Pro V2 or Ender 5 Plus, which is good for a 1st 3D printer?

1+1+1, makes 3, it doesnt make 4 ...

Just got my Voxelab Aquila. First print was a beautiful benchy. Time to fine tune my printer. Liked and subscribed 👍

That was extremely useful. Thank you.

First off, thank you so much for yet another awesome video. Ever since I started in the 3d printing world, I have only stuck with Simplify3D due to it's ease of use. I tried cura a couple of times but never could get a good profile for my upgraded ender 3 pro. I just get overwhelmed with all of the settings in cura which is what ends up making me go back to simplify3d. Oh and your website is a godsend and has helped me make much better prints.