Noob's Guide to Modding Headers!

Stupid question, would it be advisable to get a ECU tune if I were to get short tube headers installed?

How bout a header to make a V6 sound more like a high pitched V12

You have it backwards. Short headers are tuned for high RPM, long tubes are tuned for torque at low RPM. Same as an intake. The pipe length is tuned like a musical instrument, a longer pipe reverberates at a lower frequency.

"Just like everything in life, size matters too."

Yeah, I’d never buy anything that has been approved for use in California.

And good headers for a 370z

Where could I find true long tube headers? I have a 2004 Mustang GT and can't find any...

Some of these looked like balloon animals!!

Good video. Not your fault but too many pedophile, I mean Disney commercials.

long headers hang low
Me with my Bronco:
"I DON'T HAVE SUCH WEEKNESES"

Thanos 📝would 📝like📝 mid 📝length📝 📝headers📝

I have shorties now but I’m going long tube soon

An option for some mid 90s early 2000s cars is a chip I have the jett stage 2 on my 4cy 5speed s10 with a header and cold air and it went from painfully slow to slightly less slow (14 sec to 12sec 0-60) ecus are expensive and getting a actual performance gain from a stock ecu with a header for like 200 buck is totally worth if u plan on daily driving just do your research

What kind should I get I drive a Honda Accord and I don’t want it to sound like it’s shitting it’s pants down the road

The gt350 sounds different because it's not a normal floatplane, it's up down up down and not down up up down

Friends, repent from your sins. No car can satisfy your soul. No matter how much you put in your car, it will not give you what you are looking for. Repent and turn to JESUS. I bless you all in the name of JESUS so that you can do HIS will. I cast out all your demons in the name of JESUS

Shorty headers
H pipe
cat back, get that torqueeee

So what is the typical price range for long tube headers I’m making my 2005 doge truck a racing truck and have about $800 dollars to spend on headers. Is that enough or do I need more

Who wants their Corvette to sound like a Ferrari?! XDD

I love how he put a Subaru when talking about reliability and detonation.

What do I use on a 1997 Rx-7 used for drifting but also a little daily driving as well?

I prefer to have magnaflow headers with borla exhaust pipes on my car

Samurai champloo music at the very beginning. I don't thing anyone finds that interesting, but I like that soundtrack.

What about firing order of the cylinders than ?

About a year ago, I had short tubes installed on my 03 Dakota 3.9L. Between that, the cat, magaflow rumbler, and turn-down at the bed, it sounds nasty, but tame at idle and low rpm cruising. Due to the fact that the engine only revs to around 5k, I don't get quite the drop off that some cars get, and it still sounds good if I'm pushing redline. Only complaint is the drone that comes with have an exit underneath the vehicle. I've had a number of people ask me if it was the 5.2L since having it installed, so I guess I can be considered a ricer now... 😅

Honda vtec... turbo... true long pipes... I need it.

Looking to make my c7 z06 sound the most insane

Wouldn’t stock headers have a better sound because the noise will go out quicker?

Thanks im 17 and I don't like the way my rusted cast iron headers look in my Mustang

Is it ok to just drive with the performance mods if you have an adaptive ECU? I put headers on my 01 tundra and the only real tune available for these plugs directly into the ECU and disables it from overwriting, but it costs $600.

"And before you feel bad about running shorties , remember that how you use them also matters " I can relate but it's not related to cars

So I can make my honda sound like a skyline

Hot rod area is not dying

I am a little confused....which one should I use for my tesla.... I want it to sound like a ferrari ʘ‿ʘ

Hey Bladed Angel, I was wondering, would it be possible to tune the sound of a piston engine through the use of extremely clever header design to make it sound like a Wankel/rotary?

Of course, the more amount of cylinders a car has, then it would sound more "even", which might help make it more possible, but not everyone can afford to drive a V12. What about a clever header design that can make an inline-6 sound like a Wankel/rotary?

So I'm thinking that the primaries have to be equal-length and also bequite small and short, so the speed of the gas is moved evenly and very quickly to join with each other. I'm also thinking that it must be a 6-1 instead of 6-3-1 as most inline 6's use. I'm thinking that the system might also use a high-pass-filter resonator, to only allow high pitched sound to come through, which makes it sound even more like a Wankel/rotary.

Long Tube Headers... 05-2011 Grand Cherokee SRT8. Who Else Went Through Hell And Back Installing Them And Lived To Tell LMAO. 11 Hour Install Time On My 06 Jeep Commander With A 5.7 Hemi. And I'm A Chrysler Tech With 5 Years Experience. Omg I Was Gonna Do A Cam Later But The Thought Of Taking The Headers Back Out Gives Me The Chills hahahahaha

Imagine a hellcat red eye with tru long tubes straight piped 😲

Is there and header to make my little v6 tacoma sound like a v8?

cool background music

So I've been watching car videos all day now and I just wanna take a moment to appreciate how awesome cars and their surrounding community is

True long headers please.

Anybody know if long tubes on a 3rd gen hemi Ram are a pain in the ass?

I ligit read the title as a headers guide to modding noobs.

I'm still new to this stuff and I'm really confused I have a 2007 Chevy Colorado 4 cylinder and it sounds like an arc car and as the first thing that I would like to do is make in sound different so I get that I should get headers but what kind should I get to make it like of rumble or at least not should like a tiny truck

I just put a tuba in my engine header

Long tube: exist



Thanos: perfectly balanced, as all things should be