Комментарии:
I know this is kinda old, but you're still using it in your build I assume, ever think of adding heat sensors, pump monitor, etc to your RPi? Or how about debugging data line from your PC to the Pi? Have it give you what it is doing, & any problems during boot... will a PC do this? Maybe control video board hardware side overvolt? Now I am just guessing, but I do not want to go food shopping on a Saturday night & I'm delaying me leaving. Why can't my pets eat a can of soup? ... leaving now. btw, controlling the GPU hardware over volt would beyond SUPERCOOL! ... could it even be done?
ОтветитьI like this better, why use the PC when you could use a raspberry pi, & still be able to use the RPi when the PC is off is number one reason I like this, it could just be showing weather, home security cams, rss/email messages & news.
ОтветитьCannot figure out how to use text editor. Help
ОтветитьI tried this for myself but i dont think the img file i got works, is there any chance that you could send me the file?????
Ответитьhow to build 1-4 rs485 sensors monitor based on PI with relays, programmable alarms reactions and display with scales and data storage?
ОтветитьCan someone help me find the USB pin out connector cable? (uk)
ОтветитьI almost turned your video off because you speaking about a damn vpn for almost 4 minutes
Ответитьmy pc is connected to wifi 6 and when i try to connect the pi to the mobro app it does show til i put my pc to wifi 5. Is there a way to enable wifi on my pi4?
ОтветитьAwesome -- been meaning to build something like this with one of my old PIs. I was a little confused about the software to use, thanks for filling in the gaps.
ОтветитьVery cool man! nice video.
ОтветитьHi.
I am trying this with the Pi4 and it works but I still get the lightening bolt for insufficient power, even using the undervolt commands. Is there any way round this or is the Pi4 just too demanding for a USB header plug?
Nice but complicated
ОтветитьWhich raspberry Pi should I get, could someone please link me
Ответитьdo i need an image if i have a rpi image already i tried to do those setting in the config text file when i went to save it said permission denied can you help ?
ОтветитьWhich fucking ip address
ОтветитьDoes this work with Linux?
ОтветитьIt looked sweet until it reqired network access to work. So not only does part of it run in the background on your PC, you're also tied to a network. I hoped this project would have lowered workload by the computer. Colour GUI on display is nice, but that's all. Maybe someone has a project that reads fan headers and temp sensors from GPIO pins, and then lets you display information in custom layout on PI screen. An animated background would reduce static image on display.
ОтветитьReally odd .. considering that the Raspberry Pi is connected to your PC (or can be) via a USB header WHY use a WIFI?! Makes zero sense.
ОтветитьIm looking more for the actual physical connections with the pie/mb/gpu is there a video on that?
ОтветитьYou mentioned an IP you got from eirler. When would we have gotten this ip. I looked thru the video and couldent find it.
ОтветитьCan this work on a raspberry pi zero?
ОтветитьCan this be done on a Pi 2b as well ?
Ответитьi installed all how you explain but on my screen i have "no signal"
ОтветитьWhat keyboard is that
Ответитьsir i want to ask, please reply.. from that waveshare lcd, can it run 60fps video on that little screen? thx
ОтветитьNice! Could you please tell what is your PSU wattage?
Ответитьanybody have a 7" or 10" screen they can recommend that can be used for this?
ОтветитьIs there anyway to, effectively, cut out the Raspberry Pi and just use this or another panel as a 2nd monitor driven via the PC's own video output and powered by USB? I'm really short on space and need a 2nd monitor and occurred to me a tiny monitor behind the glass panel of my PC (I have ideal routing for cables out the back of the PC from inside it via unused GFX card slots). Ideally 7" or 8" panel would be perfect for me to monitor social feeds whilst gaming. I'm just REALLY struggling to find something online that doesn't either run via a Raspberry Pi or just has too many features like speakers, touch screen, runs on 12v, is just ugly!
ОтветитьCan you power a RPI 3 b plus and it's 7" screen on a sata or molex from a pc PSU??
ОтветитьSo can you power a rasberry pi 4 and a 7" ips capacitive screen off of you usb header on your mobo by undervolting the rasberrys CPU too?
ОтветитьIts a bad ass application, keep it up!
ОтветитьThank you for wearing a different Tshirt in the add, it's easier to skip.
Ответитьso do you have to use windows to connect to it?? could you use ubuntu or some other *nix OS??
ОтветитьWhere did you find the USB pin out connector to power the RPi???
ОтветитьAnyone know where I can find the USB pin out connector ?
ОтветитьDo u know if there is a program for osx? I have a hackintosh
Ответитьcould i use this to put a gif on the screen instead of monitoring?
Ответитьad..... free improvement. high quality content... uploads 1080p haha still video was helpful
ОтветитьDoes this work if your pc is hardwired? My mobo doesn't have WiFi but I want this without taking an HDMI slot on my 5800x/3070
ОтветитьYou are fired from my viewing list for being sponsored by a VPN.
ОтветитьHey man, I have the same screen you have linked in the description but it says it won't work unless the drivers are installed. At first, I had mod bros on it and working if it was connected to my monitor, but I still have the blue uctronics screen on my 3.5inch lcd. I tried doing the commands as the modbros was booting up but it over rides it and just boots mod bros. So I wiped my SD card, and downloaded the recommended OS image and tried to install the drivers thru thr terminal, which it let me get to the end where to must reboot but when I reboot I got a solid red light on the Pi and no boot. How do I get get drivers installed ugh. Before or after modbros?
Ответитьis the image the only thing i need on the SD card, or do i need other software before that one?
ОтветитьIt's ok I guess... Personally I like to run Kali and wireshark on my "sensor panel".
ОтветитьAny link or advice on the pinout? Going to go for Gigabyte B550 Vision D
Ответитьi can't start it in raspberry pi 4? same setting?
ОтветитьYou have to upside down the cpu cooler unit to avoid pump sucks air from the top of it. Coolers use to be fullfill at about 90%.
ОтветитьI've tried the ip address on my desktop, laptop and phone and the request times out every time. Is anyone able to help me out here please?
ОтветитьHello and thank for for the tutorial!
I just want to know if I can connect the screen with the pi 4 model b?
I have a question please repsond if you have time if I did this and had to restart my pc, would I have to re adjust my mini screen on the inside with stats each time, like open the “stat display program” and re drag it over or would it auto turn on when I turn on the pc
Ответить