Комментарии:
Thank you for this great How To! Did you manage to balance the ronin sc with the Sony a6400 and your Tamron 28-75 or will it hit the motors at the back because it is to front heavy?
ОтветитьThank you
Ответить10 minutes of Gold ❤
ОтветитьWould it work with my Sony zv-1 mark2?
ОтветитьCan’t see anything ur trying to show
ОтветитьI actually didn't know that a wire plugs from your camera into the gimble - is that how it communicates what should be focused on or tracked? I have a Lumix G6 but it has no USB or multi port so can it not be used with a gimbal?
ОтветитьThis was so helpful, thanks!
Ответитьsuper helpful.. thanks!
ОтветитьThank you!!!
Ответитьronin sc the roll part i could never get it to stay still. it always tilts no matter how i do it.
ОтветитьI have no idea how to make this thing look straight forward. It’s way over complicated
ОтветитьAwesome video thanks!
ОтветитьI’m on day four….
ОтветитьHey Jake, What screws are you using for the spacer plate? I don't seem to have them in my kit?
ОтветитьThank you, Jake. You cleared up a few details that are very important!
ОтветитьHi Jake.
Great video and will follow you.
I was offered a used DJI RONIN SC, that look like new.
So i have a question because i want to use older cameras, like the Canon EOS M with Magic Lantern software.
The Canon EOS M does not have a USB port at all. So is it possible to use all kinds of cameras without connection via cable?
Hi, thank you for your video. It helps lots. The usb cable doesn't work with my anon EOS t7i. Is there some other cable I could buy which could be compatible? Also, why is important to connect the camera to gimbal? Can I still do videos with out connecting the camera to the gimbal? Thank you so much!
ОтветитьHi! I’ve been looking for some infor on this but have come up empty handed. (Newbie here 🙋🏻♀️) I have a canon rebel T6s, is this gimbal compacts with that camera?
ОтветитьGreat quick video thanks helped a lot
ОтветитьThere is no way turning the camera every angle and have it not move. I been doing this for 2 hours now
ОтветитьCan I use a Canon Rebel T6 or is it too heavy for this
ОтветитьAnyone else getting the camera always tilted to one side no matter how perfect u balance the devices???😢
ОтветитьCan I use a DJI Ronin SC with a Panasonic Lumix GH6? Thank you.
ОтветитьThis is the most unclear explanation on how to balance a gimble
ОтветитьHi can this work without the cable? Or do I need the cable to make it work correctly. Thanks
ОтветитьGreat video, thanks, but how to balance light camera such as Sony RX 100 viii
ОтветитьI bought one of these used, love the simplicity and light weight nature... but my Z6 with the 24-70 2.8 lense can not seem to clear it. No matter how i've messed with it, I can't get the viewfinder to clear which severely limits it's range of motion. Do you have any tips on how to overcome that? Or does that mean I need a bigger gimbal?
ОтветитьI still asked myself questions, had to rewatch and make my own deductions. A swing and a slight hit/miss.
ОтветитьWhen I begin to set it up( before I place the camera on it) my gimbal does seem to lock like yours does. Mine won’t stay in an upright position until the camera is on. Is this normal?
Ответитьthis was not that helpful. Goes way too fast and seems like †here are no issues, everything works in this perfectly, if someone is having issues like none of what your saying works as easily as your saying then there is no help with this.
ОтветитьOne of the worst tutorials ive seen. "hey let me show you how to put it together from a distance and no close up shots..." almost as bad as DJI themselves
ОтветитьExactly what we needed to watch in order to get our new Ronin SC up running and balanced! Thank you
ОтветитьI’m trying to set up the R6 with the sigma 35 mm / rf adaptor and it’s giving me some issues. I’m wondering if I need counterweights.
ОтветитьThank you for this tutorial! I have one question though, I am working with a lens that is a little bit bigger than the body of my camera which makes it not quite work when attaching the plate to the camera do you have any recommendations for that
ОтветитьThanks!
ОтветитьThis whole set of videos was incredibly helpful. Thank you for making them!
ОтветитьYour tutorial is way better than DJI's, you actually explained every step and explained what the two cables do. Good job!
ОтветитьWhat kind of camera do you have, i got one but my camera is not compatible with the gimble.
ОтветитьNot the best tutorial I've seen tbh, you go quite fast and don't show us which buttons you're pressing most of the time. It wasn't clear at all.
Ответить2 years later, still much useful 🙏
ОтветитьWhen I double click the front button to recenter the gimbal, it is off aligned to the left. Does anyone know how to fix this. I have tried recalibrating several time but it does not fix the issue. Please help.
ОтветитьYou're a lifesaver man! This was the 4th(?) tutorial the others just messed me up. Finally start to finish and all works as I'd hoped!
ОтветитьThank you ! One question: im using the Sony A6400 and will get a 552 gramms Tamron 17-70 in a few days. Is it correct That the plate is not long enough so it is hard to get the gimbal balanced perfect? And second: is there any reason why on DJI site no tamron is in the compatility list?
ОтветитьThanks for the video
ОтветитьCan I use this remote Control from application without connecting camera to Ronin via cable?
Ответитьthank you for your sharing
Ответитьwas gonna watch until i saw it's over 10.5 mins of waffle! GTFO!
Ответитьi had to google, plural of axis is axes
Ответитьthanks for tutorial. Just got mine, and i could absolutely not figure it out from the ronin tutorial of a man doing it silently with an english language voiceover. now i have it calibrated i just have to figure out how to use it! i'm sure your other tutorials will help, so i'll check em out.
ОтветитьDoes this work for a canon rebel t6?
Ответить