Комментарии:
I don’t have msahci in registry editor
Ответить2022 works like a charm..thanks to this channel!
ОтветитьMy true hero
ОтветитьI had value 3. What that means?
Thanks!,It really worked!
Si esto funciona te debo una chela, ahora te digo que sucede...
Ответитьwon't work for me ?
ОтветитьAvery belated thanx.
ОтветитьOmg it freakin work! Thanks finally
ОтветитьI wonder if you still read these comments. How do you do this if you have two bookable drives with Win-7 and Win-XP If you switch it back in the bios will it still boot. I'm not using a boot manager, I just use the F12 key at boot-up to select which drive to boot from as each drive has it's own operating system.
Ответитьi'm using intel dual core windows 7 and bios not showing AHCI
ОтветитьMy BIOS still only shows 2 options, IDE and RAID. I researched some more and found my other people with my motherboard who also couldnt get AHCI even after BIOS updates and a lot of tinkering. I think ill just leave mine...
ОтветитьI installed a Samsung 850 pro, just using the migration software to copy old drive to it. Looking through the Samsung magician app it tells me I need to enable achieve for optimum performance. Currently it is in raid mode when I look at the bios. I have numerous times changed the msachi to value 0. Currently set at 3. I reboot then enter bios and change sata to ahci. Upon reboot it just keeps looping around Windows startup, with a flicker of bluescreen then tries to boot again and again. If I renter bios and change back to raid mode it boots just fine. I have also looked at changing the iastorv to 0 but it already is. Any ideas????Laptop is an old dell m4500. Thanks
Ответитьit worked, great!!!
Ответитьit worked. thanks a lot !
Ответитьthis worked, but my value was a 3 and not a 1 like yours. but i made it 0 and it worked. thanks!
Ответить1. Follow clear and easy steps described. 2. Fix problem. 3. Thanks!
ОтветитьI forgot to set AHCI before installing w7 now when I tried to swap from IDE to AHCI I kept getting BSOD. Couldn't figure out how to fix it until I saw you vid. Such an easy and quick fix. Thanks alot man!
ОтветитьCant find msahci
Ответитьthat cannot hellp me. blue screen of dead.
ОтветитьA quick thanks for your video,help me out big time and it did the trick for me. I'm sure it will be helping others out a lot also. Have a good one.
ОтветитьI did what you said and it didnt work.
Ответитьthanks.helped me so much.
Ответитьcan you plZz make a Video of How to Change Bios to AHCI in Dell Inspron 6300
ОтветитьWill have to check see if it improves games performance which are stored on my D drive.
ОтветитьMike, you are the man. Thank you!
ОтветитьYou say the normal value is 1. But when i look up in the registry it is "3". What does this mean?
Ответитьbesta.
u solved my Problem.
Thanks a lot
I've 850 pro of 256 gb ssd. when i config to AHCI and reinstall win 8.1 on it, everythings works fine.
But after next restart when bios loaded it gives me error says, "no bootable device found!" (priority already set to ssd) and keep restarting until i reconfig ssd to IDE mode and reformat it again!
why? Solution plz.
i have 2 simular pc's 1 for me 1 for my gf
for my pc this work fine (ssd conected to sata3)
and for my gf i cant celect the evo 250 ssd in bios wen i use f11 boot meny i can boot from it
after setting it back to 3 i still cant see the ssd in the bios this pc had windows on a second drive and the ssd is conected to sata 1
need help fixing this isseu
I ve done that but my bios does not support ahsi mode.... Nothing has changed and i still don t see any AHSI mode in my Bios... I am lost
You mean that all my HHDs are working in AHCI mode?
Thanks a lot man!
Ответитьthank you
ОтветитьThank you sir, this helped me out :)
ОтветитьDoes this work in Windows 8.1 64bit? (I can't fint the msahci folder)
ОтветитьI changed the value from 3 to 0 and it worked like a charm! Thanks a lot!
ОтветитьThis actually worked for me. When I restarted my comp, the ahci drivers started installing and required another restart.
Using windows 7 - using crucial MX100 SSD*
Thank you Techneek.
Thanks awesome video. I have changed it for my SATA drive, now I can buy the SSD.
ОтветитьThanks
Ответитьdumb question but where do you get the drivers ? or is it auto
Ответитьur da best works like a charm for my Samsung Evo 840!
ОтветитьI don't have AHCI in my bios, what should I do ? I'm lost !
ОтветитьWhen I changed it to AHCI and it goes past the boot screen it just goes to a black screen and my computer wont stop beeping. Changing back to IDE lets my computer boot normally. ANY HELP?? ):
ОтветитьIt work thanks for the video
ОтветитьThis key does not exist in Windows 8. Anyway to do this?
ОтветитьThank you very much for the guide!
Ответитьthank you so much for this video. THUMBS UP!.
ОтветитьWorked great. Concise. Perfect.
ОтветитьMy value was like 3 or 4. I hope this works...
ОтветитьVERY helpful! Thanks!
ОтветитьWhat happens if the value data is 3 by default and is this if you just now installed windows 7
Ответить