Комментарии:
bubbles? hum my mother would slam her cakes to get rid of the bubbles,so slam it
ОтветитьGreat job 😊
ОтветитьJust found this channel. Great craftsmanship!!!. Probably already know but shorten the chain from the bucket to the boom.
ОтветитьLo mejor de estos vídeos es la buena manicura de quien los realiza
ОтветитьI just noticed that your thumb is a big toe .
Ответитьтаков кросивая подписка
ОтветитьWhat color is that? Kraft cheese?
ОтветитьPut your mould under a vacuum for a few minutes. No more bubbles
ОтветитьI believe the dump doesnt work because the chain is too long it needs to be tight so it pulls the mechanism when its in the up position
Ответитьㄦ
ОтветитьPlease restore the Wyandotte steam shovel
ОтветитьThe dump seems too snug. Especially when you snapped it back in place. BTW I HAD that toy about 1958 or 9. My 70 year old brain really remembers the dump being quite free opening. Great job!! Thanks for the memories.
ОтветитьMy 3yr old son loved every minute of this, as did I. Wonderful work, I'm sure we will be watching many more episodes together👍
ОтветитьTip mould on angle when injecting will help for bubbles
ОтветитьI think the chain for the dumper is too loose
ОтветитьRegarding bubbles...you know your ultrasonic cleaner? It's amazing what high frequency vibration can do...hint...hint. Give it a try, find a high frequency vibration table and let is sit thre for a while, then off to the pressure pot.
Ответитьwould love to see the big train get refurbished,your work is second to none
ОтветитьPretty sure the reason why the dumping didn't work : the chain from the boom to the bottom of the bucket is too long. you need to shorten it so it pulls on it once the top portion of the boom fully extends.
Ответитьtap on your mold for the tracks
ОтветитьExcellent job. Just one question, I noticed throught other videos that you are doing plating, then polishing of axes, are you not afraid to spoil your plating? Usually the metal preparation should be done before plating.
One remark concernant the molding bubbles, you should do a vacuum in your tank instead of pressure.
Another excellent video, have thoroughly enjoyed watching most of your video,s, my favourites are the models with lights, very simple but very effective, on the subject of bubbles it would be better to have a vacuum in the pot to draw out the bubbles rather than pressure that will keep them in place, also on each filling port have have a resorvoir that will provide an excess of fluid that will be be able to flow back into the mould when the bubbles are drawn out, a lot of people do this with tin cans when casting alloy to allow an excess as the shrinkage occurs on cooling, regards Doc Cox.
ОтветитьI truly admire your skills and perseverance, congratulations
ОтветитьChain attached to the dumping mechanism that is
ОтветитьChain is too long
ОтветитьWhat length of chain did u use for the boom I've got the same one and mined missing the chain for the boom but didn't no how long I needed to get it thanks
ОтветитьThat cab is probably the earliest recorded instance of the creeper face.
ОтветитьI love watching these videos to help me fall asleep at night. There's something so relaxing about watching you work
ОтветитьYou buy old toys, do you never sell them?
Ответитьmaravilhoso parabens
ОтветитьAwesome job once more, I am very envious of your machinery, certainly helps with the final result. As stated by another viewer, shorten the chain between the bucket flap and boom and I'm sure it will work correctly.
ОтветитьI have one . The chain is the correct length.the tab needs to be bent in so that when the chain comes taunt it will cause the bottom to open.
ОтветитьSpider killer! Oh, the arachniicty! Just kidding, I hate them, too! My wife and I are addicted to your restoration videos! Fabulous work! Love the sheep and the kitty!
ОтветитьQueria um desses
ОтветитьAbout bubbles. As far as I know those working with epoxy use vacuum chambers. It helps pulling most of the bubbles out
Ответитьyou did a great job restoring the digger truck.
ОтветитьYou never use grease or other lubricant when you put these back together. Why is that?
ОтветитьRegarding bubbles have you tried tapping the mould or pure alcohol?
ОтветитьDANG IT! I SAID NO SPIDERS! In Arizona, Sonoran tarantulas are known for taking up residence in old junky cars and rusty metal toys
ОтветитьDeve ser uma fortuna uma miniatura dessas.
ОтветитьHow long, on average, does it take to do one restoration?
ОтветитьYour channel is just delightful, as is your cute cat! My wife and I love how you feature him at the end of each project. He makes the video complete.
ОтветитьWhat's the cats name? 🐈 it will make it through winter. Lol!
ОтветитьChip, I worked in a de tal office and we took impressions all the time. To get the air bubbles out of the mold of denta-stone mix we used a vibration table. Schein is a big dental tool provider and you can get em cheap there. That will vibrate all the bubbles outta your tread.
Ответитьsaludo desde venezuela te felicito que bellesa
ОтветитьSupervideo
Ответитьㅇㅇㄴ
Ответить