Air Conditioner make PC go Brrr

Way too hot for soldering with normal solder.

I like Brian, but he can't solder for crap

NO... don't ever eat thermal paste. It's toxic. Thank you.

Worst thermal paste application i have ever seen. Will it flatten? Sure. Does it make a difference? YES.

almost forgetting thermal paste. unbelievable

Ah yes, I love AC PC, they make excellent cold rock music

im thinking about water cooled shirt for the summer hmmmm...

as an ac tech of 20 years this was very interesting and very frustrating at the same time.

Fun project, but it would have worked better if you connected the cpu cooler i series with the heatexchanger fully assembled.( indoor unit)That would have made it without faultcodes. ( thou you may have to much restriction in the cpu cooler if you build it "wrong") but should work without problem if not too restricted.

Also to clear something up. When in AC mode. They never go into defrost mode. Defrost mode is always only in heating mode.

the thin insulation tape wont do anything for you xd shit is just to fix rippings in the real insulation :s hurts my eyes

what is (brrrrr)?

if you put all system in to mineral oil? no water problem anymore?

I recommend using nail varnish around the cpu and gallium instead of Vaseline

es una locura xd

Theres two 200 PSI in here and itll be a bit difficult because its my first time driving a 16 inch. I phase changed to two different thats what she said jokes before my ego could like adjust. I have achieved ego stroking elightenment

I do hvac so this is awesome lol

Aqua net is the best potato launcher fuel

Колхозный подход, мало знаний, все делается намного проще, надо учиться в России!

use the compressor out of a fridge or freezer to cool a water loop or use that unit you guys already have too cool the water resivoir as you may need over a gallon of water/coolant

Even though that mini-split condenser works well, now try putting a whirlpool HVAC condenser on it.

As no being a retard with to much money, i just created the air flow cooling system and hang out the computer in a ventilation box out of my windows. it is very quiet, weather save and starts just by clicking on the mouse or keyboard. i clean up it every 4 weeks by simple opening the windows and pulling in. ..and during the winter my computer stays very cool +5 - +40°C. the only problem i had was a 2 meter monitor cable and to drill the hole in the wall to connect Keyboard, power Network USB and monitor cables. we did the same for a friend but he uses everything Wifi and Bluetooth Which reduced and number of cables a low..

guy I'm good

guy don't hit fan

how aircond I see fan how so fast

Oh hey, another episode of "Alex gets bored with the CNC machine and decides to make something crazy!"

is it safe to use gaming laptop in room with ac that set on 16 degree celcius?

put the computer in oil + air conditioning

How about a Raspberry pi in a fridge ?

Try a second thermal sink that you pump transfer to from the CPU sink and the ac

As refrigeration engineer this is hilarious, you would be better with a fridge condensing unit setup with mechanical switches and capillary line. You would be able to get evaporation temp down to -30°c, just need to make sure you are fully evaporating the liquid. Maybe on the return put a little heater tape to make sure its fully evaporated before it gets to the comp?

just flip the motherboard water will go down

so what was he doing at around 8 minutes?

Question.
If i mount a fan and radiator on my pc case without the radiator connected to cpu, would it be considered an AC? I mean since there is nothing that would heat the water in the radiator but the fan would keep on cooling it, it would blow cold air no?

Better to use a kind of zeons like W-3175X, they have so much heat

Next step Linus!!!

Build a gas pressure chamber computer case, set up the CPU and GPU to be cooled like that and fill the case with non conductive liquid CO2!


Build it so monitor and mouse/keyboard cables are coming out of it and a power cable is going in.

But make sure it doesn’t lose pressure over time, some solid connections with copper soldering points surrounded by nylon insulation barriers integrated in the chamber wall would do the trick to get those cables in and out. (Nylon window frames with copper windows, built straight into the stainless steal chamber wall)
You connect the cables inside to one side of that and those outside to the matching connections on the other side.

Use different refrigerant! And don’t use a AC use a freezer to do the cooling!

The CO2 atmosphere inside the chamber is non conductive and the condensation of liquid CO2 wouldn’t mess up the electronics!

The case should also have a gas inlet with a valve, and a gas outlet valve on the top of it.

You get a big container of pressurized liquid CO2 and plug it on one end and bring it up to pressure. Then release some pressure on the other side to let the air out, repeat that 10 times. But make sure that the pressure in the liquid CO2 tank doesn’t drop too low so it turns into gas but stays liquid. You may have to change a couple of tanks to do that, you also need a high pressure watching window on one side of the chamber so you see if it’s filling up with gas or liquid CO2 if the whole motherboard is submerged in liquid CO2 there is nothing that can go wrong.

You can cook it at maximum power and it wont burn or oxidize!

After you test it all get the best GPU and CPU out there and put it in that thing and benchmark it! I want to see it all and how much you can push it!

Sure that video would be the most watched computer video of the year if you use a i9 or something the first time and compare the results.

subbed just because the intro

we need more videos like these again , -

then sumerge the pc in mineral oil it will keep condensation away from the pc you could prob pump the oil in a radiator in front of the condenser so yo would cool the oil a bit and the cpu would get that crazy cooling without condensing issues

you could achieve the same coldness with 2-3 peltiers

Day 4 of asking for a $50 pc

God bless the ignorance...

It’s not a tvx it’s a TXV lol and what it does is it regulates the flow of refrigerant. The other alternative would be a fixed orifice.

I just use those mini artic cooler boxes on the open side facing MBoard , cpu, ect. Its great due to not being used by the PC which keeps thing away from using pc volts.