Комментарии:
Lol your gloves sudently turn blue to white then blue again 😂
ОтветитьHow high are you?
"6'1" 🤣
Is epoxy dengerours for human
ОтветитьI'm watching from Qatar
What is the name of the color usually mix the resin epoxy?
I appriciate your work and i like to start making my own
ОтветитьCan epoxy resin be used for jewelry
ОтветитьHow to measure 7 to 1 epoxy
ОтветитьMy epoxy mix got milky-cloudy when cured... Did some research, turns out it's the moisture in the air that may contribute...
ОтветитьI mixed qcell and epoxy and when I applied to EPS board it made alot of bubbles. Why is this?
ОтветитьCould I use a drill with a small paddle mixer attached to the end?
ОтветитьOnce the two part epoxy is poured, how much time do you have to mix it?
ОтветитьHi, I've only just come across this video. Thank you. I have made a mould of gelatine and glycerine and set it to go hard. can i put this stuff over it as a protective shield? |Will it take? and if so, how long does it take to dry if it is just sponged on? many thanks
ОтветитьOMG!!! by volume NO! I only use a scale way!!!! better accuracy
ОтветитьAwesome video,
Question- where is the best place to go for supplies/materials to get started, local home depot?
Far from perfect. Thumb down. Not done homework for making multiple reuse of containers and how to mix small quantities. I personally believe a silicone stick from kitchen is better then wooden stick because it will mix better to the edges of a container and epoxy doesn't bond to a silicone, so in theory you can reuse that mixing stick many times. I'm looking for a small silicone reusable containers for the same reason. Not sure if they're easy to use, but I hope.
ОтветитьYou said mix 2 liquid resin and hardener will became epoxy ☺️ is that right or I misunderstood please??
ОтветитьWhen I’m doing carbon fibre parts and use epoxy resin can I add few drops of catalyst from polyester resin mix just to help speed up the drying time Coz each coat takes 3 hours. And polyester resin goes off to fast I’ll do a test bit but just wondering if anyone else has used it
Ответитьhow about mixing with colors, like white paint? any paints that are better? like acrylics?
ОтветитьNever gonna lift u up
Never gonna put you down
I won't stand around and hurt you
Thank you😁
ОтветитьIf I'm trying to add Q-cell filler to it, would I do the same steps and then add the Q-cells, or would the ratio for the epoxy mix change?
ОтветитьHow do you apply the mixed components to your project? do you paint on or can you pour and tilt on
ОтветитьJust say no to drugs
ОтветитьAfter preparing the resin when I pour it in a mould , what measures( time taken) do I have to take in order to let the resin harden and freeze ?
ОтветитьMine drys sticky can't get it to fully harden
ОтветитьWhat do you do about bubbles forming when mixing?
ОтветитьHow long it's to drying
ОтветитьPlease name of the three solutions please
ОтветитьSo the answer is two parts resin to one part hardener
ОтветитьEvery epoxy brand is different and, for beginners, low viscosity is definitely recommended because high viscosity versions are a gigantic pain in the ass to mix, remove air bubbles and its super easy to end up with a cloudy mess if you don't combine both parts JUST RIGHT.
ОтветитьI weighed my part B, 1.49g but when i weighed the same amount of part A i used a whole lot more of part A, is that because of the thickness difference of the 2 parts??
Ответитьnow i am confused, I have read on different epoxy containers and online that the ratios for weight and volume are slightly different, yet i see most surfboard builders using epoxy by weight and a ratio of 2:1, are there epoxy systems that use the same ratio weather mixing by weight or volume? thanks
Ответитьwhat is the viscosity(mPa.s) of both resin and hardener?
Ответитьwhat surface that we can use as container so it release easy beside silicon
ОтветитьWhat kind of hardening agent and resin can you recommend that isn't expensive? When I try to look these up on the net, I see all these companies wanting your life savings for some of these products. Isn't there a budget version somewhere to practice with?
ОтветитьThanks So much for explaining well!
Ответитьgreat video thanks so much! looking forward to your next videos :) Quick question: in terms of staining wood before applying epoxy. What type of staining mix would you use, to make sure the epoxy penetrates the wood and ultimately protects its from water? Big thanks
ОтветитьHardener should go in first..
ОтветитьI need epoxy resin until the connection of the racket is broken
ОтветитьThe container used to mix, dispose afterward or how can it be reuse? Need any cleaning agent?
Thanks for sharing
Please step by step with items name
ОтветитьWhat happened if we don't mix property
Ответитьit says on botel of eoxy 1.1 does that mean same amount of each
ОтветитьYou made that easy ...Thank You
Ответить(With a drop of pigment) I didn't know the size of the mold so i had to make the epoxy mixture twice ( 2 part resin+ 1 part hardener+ 1 drop pigment as per my Resin brand instruction). After pouring the second mixture, which is only about 5 minutes later, I realised the plastic bottle mold got heated up in a few minutes and deformed the mold.
Without pigment: Previously i had done it in one go and without adding any pigment, and it went perfect.
What could be the reason for the extreme heat that deformed the plastic bottle mold and the resin expansion? Kindly help me mitigate the problem 🙏
Sorry if I sound stupid(it may be the case, though)but...you said thar by quantity(volume) it is one-two. In weight is 100% 40%? I can't make it cures very well. It is(almost)always some "honey like" residues when the whole is hardened. And it takes at least 2 days depending on the size to solidify.
Thanks for de vid, was useful!
Question: is it sticky stuff? In other words, will it bond well if poured onto a painted surface? When it goes off will it detach from a painted surface?
ОтветитьHere is my question. Where in the world are your safety glasses? Is the MSDS in braille?
ОтветитьI appreciate the tips, thanks!
ОтветитьWhat's the best kind for being very clear
Ответить