Double layer PCB prototyping 0.1 mm traces/spaces

And what are these used for?

nice

this is pure art! congratulations!

You know sergey vertyanov?

+++++++++ Фантастика!!! +++++++++++

Hello, what angle is the cutting milling cutter ? And what CNC model do you use in the video ?

ENG: so congratulations for the achievement but big frustration no indication on the setting of the strawberries (speed of advance, dive, pass, speed of rotation .....)

FR: alors bravo pour la réalisation mais grosse frustation aucun indication sur le parametrage des fraises (vitesse d 'avance, de plongé, de passe,vitesse de rotation.....)

Hello, I would like to know what type of cutter you use to make the circuits on PCB, thanks

Do you have your representive is in India?

To answer some of the questions below. Sonia have had this machine for over a year now. It is an amazing price of kit and extremely well made. Isolation milling can take e quite some time and as does the probing of the PCB surface prior to milling. This machine can mill a small PCB in about 3 hours if you include the probe and mill operation. Also make sure that you have the correct isolation routing bits for the job. Also weave a small syringe of mineral oil to cot the PCB surface with prior to milling, it makes a big difference to the quality of the cut. With respect to milling the outside profile of the PCB, if the PCB is square or rectangular then far better to use a PCB Guillotine to cut the board.

So for a slightly higher volume of birds, day 10 or more, I use this machine to drill all the holes in Microtrak pre-sensitised PCB board and then expose and etch in the usual way. This machine is very precise and accurate however use as intended for very small prototype runs and either use conventional etching or JLCPCB in China for more than say 20 boards.

This is an outstanding machine for its intended purpose. I am about to test this out to do some M2 thread milling in aluminium and sure it will be fine.

Which software u have used for the design?
Can u please share the link in description

Do you have representatives in Mexico?

What bit does one use for routing?

Ask for a sample pcb,do the soldering, if u succeed, then buy the machine.

👌❤❤❤

Did you intentionally choose the worst song you could find or what?

Que tesão mano

I think the background music is really weird.

С постоянным зазором. Очень большая паразитная ёмкость монтажа.не для вч.

Foreigners are amazing, they develop so many machines

I have never seen any such machines get manufactured in my country 😭

Which G code sender is that

How much does this machine cost?

PVC per kar

Тут интересен сам процесс изготовления плат, а не заказ заводских плат. Автор красава, поддерживаю твоё хобби.👍🏻

I need this

Pero es incómodo soldar

Yo Yo, yoyoyoyo yoyoyyoyoyoyoyooooo

Music???

Can we add specific tool to do the same on a ender 3? X)

Это все конечно красиво, но смысла не имеет - пастой паять эту плату не выйдет, руками замучаешься + изготовление долгое, и всего два слоя

For a 3,859.9 € small machine made of plastic (white HDP) it is at least a bit surprising

Slow the speed down on the machine it might take longer but the quality will be on the top.

be nice instead of the most annoying music that there was some narration about the specs and so on. sheesh

lamest effing music

How to make traces for the text or any shape to be milled as wire in pcb software can't be placed without software

Штука очень крутая и точная, но за 3900€ мне кажется можно абонемент на pcbway на 10 лет купить.

What machine is that ?

Osm nice

Name of music, Please!

doc?

What a nice machine

Sangat menabjubkan

Bagus

Супер!!!!👍👍👍

Can't be used in high voltage circuit

Jo v hota h synopsis me uska asar kewal aatma ko hota h pta nhi chalta hai

Хуйня музыка

So satisfying ❤️

Beautiful chuck 💚

Toda la tecnologia para terminar dándole a mano con un martillo.