Комментарии:
Dude. The anycubic is strong with double zaxis and x. The creality all of them are completely inferior plus the strength. Creality is weak af.
ОтветитьHi. Are you still answering on this video?
ОтветитьIs this printer wireless ?
Ответитьpicked up the anycubic mega S as my 1st printer and it's amazing.
ОтветитьDid you have any problems with the filament breaking in half mid print?
ОтветитьMe and my other half
Ответитьhey I got a question. how do you load the files onto the printer?
ОтветитьHi do you still use this 3D printer?
ОтветитьANYCUBIC MEGA. Hello, is this printer 32 bits? When she is printing it makes a lot of noise, can you sleep in the same room while she is printing at night?
ОтветитьHi thank you for taking the time to read my email any time I wanna print it shows 100 speed on the machine from panel how can I reduce it on the softwar
ОтветитьYour ABS prints are not working because that material needs the bed heated to a higher temperature and a box around the printer to prevent the print from cooling too quickly. Sometimes turning off the part cooling fan can help as well.
Ответитьcan you tell me why the nozzle dont stay heated goes up to 184 and remains at 117 so it means its not printing right helpppppppppppppppp please.
ОтветитьCurrently, similarly priced as Ender 3. Which would be better?
ОтветитьYou need to put frog tape on the build plate sticks better
Ответитьi need some advice I would like to buy a 3d printer. as a first start business making stuffs.. in my opinion I like the anycubic.. WOULD. IT BE A GOOD CHOICE TO BUY TO START A HOME BUSINESS BUDGET WISE AND ALL ..
ОтветитьJustin hi. Can you please tell me, is i3 Mega still alive ;)
Do you still print on it, have you maybe find a 'perfect' profile for i3 Mega, do you still recomend it, or you have a new 'best buy' option?
Do you have to do the bootloader and firmware like the ender 3?
ОтветитьI was Able To print The 3d Solutech Flexible Filament On my Anycubic I3 Mega Out of the box NO ADD-ONS OR UPGRADES I just raised the Extruder Tempature
ОтветитьYou're very well spoken person and don't sound like a dumbass who just woke up, which is most 3D printer reviewers.
ОтветитьI printed for about 400 hours using abs. Geting it to work is ez.
First: go to the 99cents store and get 2 try folding presentation board cut 1 for door and lid cost you around 2$ make it 3$ you will also tape.
Congratulations you made enclosure.
Then before you print warm the. Bed to 100 got to wait 10 min let that box warm up. Now for print.
Why is the parts cooling fan so far away?
ОтветитьGood shit bro
ОтветитьMaybe using a hotter build plate would be better for ABS
ОтветитьYou could actually get it to print TPU in Chinese models.
Ответитьdo you still have this printer or someone else? there are any problems after a long period of use
ОтветитьI just ordered one
Ответитьi love my i3 mega but for next printer will be ctc 3d printer
ОтветитьCan print TPU?
Ответитьits the hardware that limits what filament you can use? should be easy to upgrade
ОтветитьIs it better than ender 3?
ОтветитьI’m interested in designing things for 3D printing. I have a similar freehand pen that uses same material. It seemed like the material and temperature was mega important. I saw figurines online which were printable
Ответитьwhere do u bring the material to let the printer print it ?? i dont get it
ОтветитьHello, Creality 3D Ender 3 or Anycubic i3 Mega? which one would you recommend?
ОтветитьIs the anycubic customizable? If so, you could change the head for a direct drive one... That's the cause of the TPU issues. The filament compresses too much inside the teflon tube. So if you have a direct drive instead of bowden it should work... in theory.. ( I hav no experience with 3D printing, but I do understand the technology behind it...)
ОтветитьSet this @ 100 microns and it will solve your problems.
ОтветитьI've been having a ton of issues with mine(first printer) what slicer do you use? Any recommended settings.
I'm trying to figure if the failing is on the part of my machine or its my error....so I can fix whatever it might be, me or the printer.
what is the meaning with def / 210 of 3D Printer control console with beaping alarm
ОтветитьABS? steady hot temp = enclosure. 80buck printer is enought and better. just need trash belt drive that everyone use and better linear rails. 101 get good layer is forget belt drive and upgrade linear rails. even cheapest extruder make better quality than...
Ответитьhi , you need a ANYCUBIC I3 Mega modif extrudeur Flex/TPU for tpu printing i have it and print like a charm :) and u can print it ofc
ОтветитьConsidering this as an upgrade to my reliable XYZ DaVinci Pro Jr., which seems like a toy now compared to the Anycubic. Thanks! Your projects are just magical, your production, excellent!
Ответитьon a average how long does a spool of filliment last? i know it depends on the size of objects you make,
Ответитьsir im new to 3d printers first video i seen was from naomi cyberbot wu channel,shes a big techno geek,realy smart n sexy,what kind of material is the filliment made from?
ОтветитьTP you adjust the heat
ОтветитьWould you recommend taping the bed?
ОтветитьI thought you only do drone videos
ОтветитьYou might try putting your printer in a box to print ABS. ABS likes to be printed in an enclosure
ОтветитьDude study more Abs and PLA then come back a do a review I have this printer and it's amazing.... Each filament needs time and settings
ОтветитьGreat review Justin, Always extremely detailed!
ОтветитьI hate abs...is it possible to print with acryl
Ответить