Комментарии:
ese esta mal hecho. lo venden asi para confundir a las personas, nicola tesla tenia su generado magnetico de 5kw , fucniona y exixte pero no quieren ke lo tengamos. y tambien desaparacen o los matan o los compra.. PJ stanly meyers y 10000000 inventores.
ОтветитьIt's a great transmission though!
ОтветитьDesign is wrong
ОтветитьIf a motor is to be moved by permanent magnets alone, then it must also be possible to build a motor based on falling stones. The ground and the stone also attract each other. But no one has ever succeeded in doing so. You have to lift the stone up again! In the same way, magnets that have been tightened must be released from each other with great force.
ОтветитьCan you put this is a greenhouse and see how heat from the sun or greenhouse gases could effect the magnets? I think that would be an interesting experiment.
ОтветитьUna gran mentira sin sentido no entiendo que ganan con esto. Si así fuera porque no lo construyes vendes energía y te haces rico si no tu cualquiera que lo desee.
ОтветитьNO!
ОтветитьBiegnij do sklepu wędkarskiego, kup ołowianą taśmę i zrób połowiczne ekranowanie magnesów.
ОтветитьNo it doesn't work
ОтветитьExtremely strong Betteridge's law of headlines with this video.
ОтветитьFor 15 years, I have been working with angular resonance and I am ready to do the electricity generation project together with investors who agree to make an official protocol. Everything will be done openly after the signatures are signed.
Ответить"mfs don't even know about"
ОтветитьThere is no such thing as free energy and never will be. I do like perminant magnet moters but even with those I imagine the magnets would wear out over time and have to be realligned.
Ответитьput it on magnetic layline
ОтветитьIf u want some force from magnet try use turbine type of perpetual...coz turbine type version is more accurate to testing the magnet field power...put strong magnet and magnet to another magnet only have gap 1mm...to produce electric try put dynamo instead when perpetual turbine magnet spin...I don’t know either if this idea work😅😅😅
ОтветитьToo much cogging
Ответитьwhat does a magnetic shield do?
if they can actually shield magnetic field, then wouldn't it work as a perpetual motion machine ?
mu metals and a few other material types such as electronic magnetic repression and special paints, allow you to make “fake monopoles”, you can’t beak the laws of physics, magnetic induction and motion but you can neutralize them to some extent. You might also be able to use electrostatic forces instead of magnets.
I asked an LLM to summarize the basics of the technique.
electrostatic forces arise from electric charges, which can be considered as monopoles in the sense that an individual charge (either positive or negative) can exist independently. For instance, an isolated electron has a negative charge, and an isolated proton has a positive charge. The electrostatic force between two charges follows Coulomb's law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
So, while electric charges can be seen as monopoles in terms of their isolation, they differ fundamentally from the concept of a magnetic monopole. The similarity is that both electric charges and hypothetical magnetic monopoles exert forces that diminish with distance according to an inverse-square law.
Remember though you are limited by the max “ pressure “ insulators can hold back before there is a short.
electrostatic forces arise from electric charges, which can be considered as monopoles in the sense that an individual charge (either positive or negative) can exist independently. For instance, an isolated electron has a negative charge, and an isolated proton has a positive charge. The electrostatic force between two charges follows Coulomb's law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
So, while electric charges can be seen as monopoles in terms of their isolation, they differ fundamentally from the concept of a magnetic monopole. The similarity is that both electric charges and hypothetical magnetic monopoles exert forces that diminish with distance according to an inverse-square law.
I can dream of building an engine that tops off the electrostatic charge , and allows you to have a very efficient engine from algae power lol
High-Voltage Transmission Switching: Utilizes advanced methods to switch and control the flow of high-voltage electrical currents.
Superconducting Loop: A loop made of superconducting material, which can carry electrical current with zero resistance.
Simulated Multiple Windings: Achieved through a unique configuration or operation of the superconducting loop, giving an effect similar to having many windings in a traditional electromagnetic setup.
Slow Electron Propagation: Utilizing the relatively slow drift velocity of electrons in a conductor to affect the electromagnetic properties of the system.
Monopole-Like Magnetic Effects: Creating magnetic field configurations that mimic some aspects of theoretical magnetic monopoles, using the properties of superconductors and electromagnetic field manipulation.
Fundamentally, magnets don't store energy. So there's no way to make any sort of 'motor' using permanent magnets and no source of power. It doesn't matter how cunningly you arrange the magnets, or try to shape the field. There's no energy there to extract.
ОтветитьPermanent magnets are just SPRINGS.
You cannot build a perpetual motion machine with just springs (or magnets).
So NO, it can never work and dont trust anyone who says it can.
If you aren't going to make one to his specs, DON'T ATTEMPT TO MAKE ONE!!
Ответитьgood for battery not motor
unlimited self charging battery
You can not build a perpetuum mobile. 😀
ОтветитьTo not criticize, but a motor consumes energy and engine produces energy
ОтветитьThe Magnets positions are false, the magnetic fields blocks instead of supporting each other.
ОтветитьYou could make the unwanted magnetical interference less by shielding the magnets in copper pipes. Ever seen a magnet fall down a copper pipe.
Ответитьcan't you create electromagnets that switch off just before they start to drag on the wheel?
ОтветитьTry a spiral of similarly oriented magnets in the rotor with a full flat north and a full flat south on the there side of the rotor, because the locking of the north and south poles actually rotates at all times maybe the magnets oriented inward torward the center of the rotor will just get caught in the north south vortex and then rotate more like a tesla turbine than a pushing device, more like magnetic friction.
ОтветитьEso es falso... laa fuerzas magnetically se compensa y se detiene
Ответитьpreciznost ti tam chybí
ОтветитьHello James. What do you think about generating power with a Powerball? Imagine a system that starts spinning automatically at the beginning and then spins at specific intervals once it reaches a certain speed. If a mechanism is developed to keep it spinning continuously once the Powerball reaches a certain speed, I think it could enable constant energy production. In this scenario, I believe we might even surpass the laws of thermodynamics. I submit this idea for your consideration.
ОтветитьA lot of useless effort and costs. Does this bring back the YT fake videos?
ОтветитьNo, only in your phantasy. You had to talk with Elon Musk. He is waiting for this "motor" 😂, really 👍🙈
ОтветитьDon't construct magnetic engines of dangerously high speeds, it will kill you.
ОтветитьQuite an expensive fuel, magnets.
ОтветитьThe magnets in this prototype are too far apart. They should almost touch each other when spinning around.
ОтветитьThe magnetic coupling of pumps and motors.
The magnetic rotational motion direction or motor, must have both , like North pole and south pole., similarly magnetic attraction force as well as magnetic repelling force. It must be connected to a motor which keeps on rotating with the same energy power, generated by the rotating magnetic coupling.
Se realmente funcionasse, você estaria rico ou morto....(If it really worked, you'd be rich or dead.)
ОтветитьThe magnets need to be shielded to stop the interference with the next magnet
ОтветитьYes it work but not this way, you have to place shielding to the outer magnets. Magnet shielding is very important. So this is not an ideal replica of perendev motor, it is a try to sell kits not worthy..
ОтветитьAnybody measured rpm of this thing?
ОтветитьHi you can try to fuse it with kinetic energy !!
ОтветитьPlace the magnets inside the inner slots and allow them to slide up and down and than place the outside magnets close and in a different formation that works with gravity, centrifugal force and the magnets complimenting eachother. I feel like it could be done but maybe that's just wishful thinking.
ОтветитьPerpetual motion is impossible
ОтветитьSeeing powerful magnets on mythbusters made me think you could build a motor like that.
ОтветитьWhere is the shielding? Why it has only one rotor?
Ответитьit would work you just have to invent a monopolar magnet simples
ОтветитьAwesome lecture...
Ответитьrespect ! Do you send postage to Germany?
Ответить