Комментарии:
Thanks for the info 👍
ОтветитьPutting masking tape is good idea❤
ОтветитьI really like the white putty and masking tape idea. Glad to see that the damp q tip can remove it. But why not smooth it down more before it dries? The way people do with dry wall plaster?
ОтветитьI am going to do this on my next build, thank you for this great advice.
ОтветитьLIKED!!! I didn’t sub because I’m not a model builder (yet). But if I happen to get into model building, I will definitely be subscribing. You did a great job of getting your point across verbally and visually. I really think your method of demonstration is extremely effective. In my limited model building experience (less than 5 kits in about 30yrs), I would have probably just applied the putty and sanded it down. I know it would have turned out bad, but I would not have known to do it the way you showed had I not watched your video. I’m currently looking for an evening hobby that I can do while spending the evening next to my wife while she reads, watches tv, or does one of her hobbies. Model building comes up a lot, but I don’t have much interest in most of the types of models available, and some of the skills needed to turn out amazing models are a bit daunting to me due to nerve issues in my hands, elbows, and shoulders. Your simplification of this process does make it seem a little more achievable. Now, if I could only find models of things I’m interested in.
Ответитьvery cool idea! might have to give this a try on a gunpla model soon 😊
ОтветитьThank you
ОтветитьGreat ideas as usual. I'd like to see you do a rundown on the explosion of paints and thinners that have me confused.
ОтветитьI never tough of using putty with masking tape 😂😂. Thanks a lot! It will save a lot of sanding time and rescribing
ОтветитьGreat Tutorial - Subd! Thank you for sharing.
ОтветитьI already painted most of my aircraft, can I still use the putty on gaps that I have on my plane
ОтветитьAwesome tip Thankyou!!
ОтветитьSir hi, please tell me where I can find drawing for rivets on different aircraft's i.e. placing of rivets on their wings & fuselage. Thanks
ОтветитьJust use a pva glue/water 50/50 mix, no sanding, leave to dry and re-apply. Simple
ОтветитьGreat tutorial! Thanks!!!
ОтветитьI was shown years ago a trick , a guy had liquid paper you know the stuff to cover up pen or typewriter mistakes, he used liquid paper to fill seems and gaps.. and it will sand and clean up with water.. it works great on small holes and minor seems.. and it's cheap
ОтветитьI have discovered that the best to clean off acrilic putty like Vallejo or AK, instead of water, are isopropyl alcohol and acetone.
ОтветитьGreat tip! Water-based putty is the way to go!
Sometimes, when I use other brands like Tamiya, I use Gunze thinner to clean off the excess.
Great tip!!! Nice to have a fairly easy method of filling in gaps like that.
ОтветитьThanks very much for the video... nice tips, helpful and fun to watch,
If you are in Ukraine, I hope that you are safe. Even if you are NEAR Ukraine, I hope you are safe!
Nice presentation
ОтветитьBrilliant. Why didnt i think of this. Because hes more clever than me. Simples. Ive spent hours messing up filler and creating more problems than solving them. Tape,water,cotton buds. Not rotary sanders that melt or files that do GBH to plastic,rivet and seam lines. Suddenly that wing root filling job seems totally do-able. Thank you friend. Great video,to the point :-)
ОтветитьGreat tip, I'm going to try it out.
ОтветитьNice work..
ОтветитьWill water work with Tamiya putty or should use an appropriate solvent in that case?
ОтветитьVery cool info, thank you!!
ОтветитьThank you
Ответитьgreat ,thanks a lot
ОтветитьTapered swabs! That was the secret ingredient I was missing. Thanks for this very useful tip!
ОтветитьAwesome technique, very useful! Thanks for sharing 👍🏻
ОтветитьThis also works well with Milliput epoxy putty. Sometimes I use a brush or even just my finger wet with water and keep whiping till I'm left with the desired amount of putty just in the seam.
ОтветитьGreat tip, can't believe I didn't know this one.
ОтветитьThanks my good man....awesome tip! Peace!
ОтветитьI didn't know I needed to know this lol, I'm just now getting into modifying Star Wars vehicles. I need different speeder bikes and hasbros not making new models yet. Thanks buddy 👍
ОтветитьI like Dude😀TFS (thanks for sharing), GB :)
ОтветитьWow, a fantastic idea! So simple and can be used in SO many applications! Thank you!!
ОтветитьWhen you think of all the things you need to 'fix' when putting a model together, it almost puts one off from taking the hobby up again.
You guessed it, I got a dozen boxes sitting on the shelf and too freaked out to start any of them!
Great video!
Ответитьexcellent thank you
ОтветитьGreat tutorial broham, simple and to the point!👍
ОтветитьAs usual, your TUTOS are more than welcome... I wish there could be a similar solution when dealing with those horrible gaps in 1/35 figures, between arms and body, and the soldier is german and using winter gear...😁
ОтветитьI do the same - cool tip - but different putties work for me - I find the Tamiya. Mt Hobby dries too quickly, and appears to be oil based (don't like the water, turn all marbly...) - and have found the Vallejo the best for this work - the qtip just takes the surface away smoothly - I just used this technique to fix up a butty queen - the XB70 1/72 from AMT!! Oh my gosh!! Yeah!! I use this technique even for wing and body joins... it's a winner.
ОтветитьThanks for your típs, now I am starting again with my models following your ideas, thanks a lot
ОтветитьNice work man. What kit is that? Very useful I've saved this for later.
ОтветитьThank you ! Super Nice tip !
ОтветитьExcellent work and great technique. Very pleasing to watch! Thank you! all the best, Rob in Switzerland
ОтветитьActually, you can do the same with any solvent based putty too, such as Tamiya or Gunze. It just needs a bit more time to cure, like 30-60 minutes and then can be easily wiped off with the Tamiya Lacquer Thinner.
ОтветитьThanks for the tip--the masking does help with keeping down the amount of the model that needs excessive sanding.
ОтветитьExcellent info, awesome video, straight forward and to the point. 😁👍
ОтветитьThis is a Great 'How To...", I am also a model builder, and started on my first A/C after Many years, and I have a situation, Just Like Your Video!!
I tried using an Acrylic Putty, but when I wet-sanded...the putty came un-done.....;(
But This vid, will help me redo the project.........I might Even buy those 'Percision Tip Cotton Swabs'!!!