Toyota Prius ABS Reset Brake Problem

If this helped you please subscribe

Thanks for posting this.

Even work on my aqua wow great man thanks ❤

This was fantastically helpful!! Thanks so much!! <3

Thank you so much you just help me fix my car! This instantly fixed the problem that was locking my brakes up ! 🎉❤

Thanks this totally worked. What BS Toyota screwed me over but you saved me! My hero

Also work onTacoma 2014👍👍👍👍but remember to steering wheel must be straight position

My lights come to after a month of not driving it i just kept pumping the brakes now they gone lol

Very lucky to have found your video, young man. My 2012 Prius did not look like yours under the console- the white box you showed when showing where to insert the paperclip was not visible. The under console area in my car had a cover almost all the way under the steering column - same material as the dashboard. Though I was disappointed, before turning the car on I decided to pump the brakes 8 times real fast like you said, thinking it couldn't hurt. Turned the car on and to my delight, the lights for the ABS, Brake and Traction Control did not come on! A test drive confirmed the braking and smooth drive 'feeling' were restored. Thank you! We had an appointment with a dealer in two days. Thing is - these lights just randomly appeared on Sunday (today is Tuesday) - we did not have any maintenance or wheel bearing work done other than a standard oil change about 3 months ago. Sounds like this issue with the 3 lights may be a common issue - putting lots of $ into dealership's coffers. Thank you for helping me keep my hard earned money!

Worked for me!

Just fixed my 2011 Prius--did exactly what you outline and got it done in 7-10 min.. WOW!👏

I try that on my corolla and it blew the engine off. is that normal ? 🤣

Damn that was cheat code worked 🫡🫡🫡🫡🫡🫡

Thank you, worked just as described.

His girlfriend knows stuff 😀♥️

I HAVE TO THANK YOU. EXCELLENT FIX FOR A PROBLEM THAT HAS BEEN MAKING MY LIFE MISERABLE! AMAZING FIX! THANKS

Hello sir, thank you for your video. But I'd suggest being clearer as which of the holes the jumper cable/paper clip needs to go into. Your explanation was a bit vague, so I suggest actually showing the jumper installed for clarity. It is actually the 5th one from right to left on the top row and the 4th one from right to left on the bottom row. Again, I'm not knocking your video because you're in fact trying to help the Prius community save money and I appreciate that very much. I too changed the wheel bearing hubs on the front end of my 2009 Prius, and it caused these warning lights to come on, this was the fix I was searching for as I know that my brake system is operational.

Super awesome!!! Thank you for this video...after going through a nightmare wheel bearing job I was confronted with these lights....you saved me so much time and troubleshooting

I was quoted $4,135 for ABS/ Brake booster from the Toyota dealership. What can I say, THANK YOU SO VERY MUCH ❤you are awesome!!!!

Hi.Can i try for chr 2016 1.2t? . is it run?. Thank you for video

I tried this and it fixes it for only a very short time. The real culprit is the ABS DC motor that wears out and needs to be rebuilt.

Bullshit...it does not work

Will this work on a 2019 toyota Prius Limited?

I'm not sure the brakes wont go out later 😊but works for now. Genius. Thanks so much. Toyota quoted me $3500 and a 3-4 week wait for parts. SMH.

This was amazing. Had brake cylinder leak and air got into system. Apparently this caused the solenoid to close and needed to have brakes professionally bleed and reset. This worked. So much anxiety and grief solved. Thank you so much!

I appreciate you taking time to share this, thank you! Very clear straight to the point, I appreciate the help my man!

I can’t get the lights to erase. But after I pump the brakes the lights starts blinking and going crazy. But once I shut it off and restart the car there back on. Plz any more tips ? Am I not doing anything correctly? Plz let me know. Ty

I had the same problem and after messing around with the instructions several times I tried with the key turned to a position that starts the vehicle and "READY" is displayed on the dash. So, when the instruction calls to turn the key to ON position it basically means to START the vehicle.
Hope that helps.
And thank you for the video.

THANK YOU SO MUCH!!! God knows how much I would’ve paid at the dealership! You saved this teacher some bucks!

Thank you so much. I had read about the 8 brake-press procedure, but yours differed in two ways from the other one: that it has to be done in five seconds, and that you should have your foot on the brake when turning the car on. Not sure which of those two things made a difference, but your method worked. After spending two days swapping out the ABS module and bleeding the brakes I had thought my new module was bad until I found your video. I was just about the most frustrated I've ever been. So this video saved the day.

Sh*t!! This actually works!! WOW!! You’re my man! Anything for the check engine light?

Amazing, absolutely useful video, thank you for sharing tips.

THANK YOU!!!!!

Thank You for sharing this information. It was a fix !

Wow it Worked....I thought there is No Way, but hopefully it will...And it worked....Thanks Bruh

Thank you so much!!! I had to replace the brake caliper, rotor and pads. I was confused why all the lights came on n why bleeding the brakes wasnt working properly. Until i saw your video 🤩🎉 i saved so much money n it was all so fing easy. To anyone who can't get the brake caliper bolts off use a car jack n wrench to loosen.

Thank you so much man!

Bro you genius, you saved my money:) thank you

It .s only temporary escape
Again it will reflect some after days

This is great, thanks again

Where are you going up under I couldn’t tell

Very helpful, thanks a lot!

literally just fixed a roommates car with this! thank you so much

It worked!!! 🎉

You are awesome this video fixed my issue. I took my 2012 Prius V to Toyota as well as another mechanic they all said it was the actuator even though my brakes weren't out and this quick fix corrected the issue.

Does not work.

A very big THANK YOU for posting your video. Just the other day my 2010 Prius lost its brake feel, and warning lights came on: brake, traction control, and ABS. The fix outlined in your video fixed my problem and restored full feel to my brakes. All is well again. I have peace of mind. And I have confidence in my braking system. Thank you for contributing to the betterment of the human race.

It fixed it for an hour any advice?

Your Awesome! Just changed brakes and rotors on front and because of these lights that went on had to check speed sensor cables they seemed fine no cuts. Front brakes didn't work well at all. Came across your video. Thank you so much all works well now no lights

i thought this was a joke, i was in a desperate situation where my brakes failed during my drivers test and i tried this and it somehow worked. amazing