Комментарии:
Mine wouldn't load because the nut was loose. Thank you for the guidance so I could see what I was getting myself into.
ОтветитьJust hold the bottom, and it will restring.
ОтветитьFixing and cleaning string line on ego trimmer 😃✅
ОтветитьI have two ego string trimmer. Neither one came with the rubber ring. What is the size of the rubber ring? But it was working okay when I bought it.
ОтветитьAlso, I used strap wrench by Kobalt 4 in (100 mm) to hold the black center part from moving.
ОтветитьClear, concise video! Saved me a lot of headache!
ОтветитьYeah so there are tons of videos out there and I’ve experienced this too where it’s perfectly clean yet still doesn’t feed. I think there’s a fundamental design flaw.
ОтветитьOkay—finally figured out the main problem. It’s the line thickness. It simply doesn’t have enough torque to wrap up .095. Don’t go higher than 0.080 and you should be fine
ОтветитьUnfortunately it didn’t work for me. I just wish there was a way to load the line manually when the power load stops working. It’s a shame. I loved this trimmer
ОтветитьEasy fix...worked liked a charm...Thank you
ОтветитьGood video...but I have the opposite problem...my auto feed won't work so the line doesn't come out.
ОтветитьMy husband was ready to buy a new trimmer because the string wouldn't load. I found this video and he had it fixed in 5 minutes. Thank you so much! Your video was clear, concise, and exactly what we needed!
Ответить👍🏻👍🏻👍🏻👍🏻👍🏻
ОтветитьJust fixed mine it had a whole ass weave caught in the head. You know I live in the ghetto
ОтветитьMine spins but doesnt load anymoire, dont know what to do to fix it.
ОтветитьWorked like a charm! Thanks much!
ОтветитьLife saver! Thanks for the video!!
ОтветитьAny videos for replacing the spring?
ОтветитьMy ego trimmer when i press the line power button. The head only spins. It doesn't take up the line.
ОтветитьMy Ego string trimmer winds sting in just fine. However, when I bump/hit/strike the bottom against a firm surface it does not release the string. I have rewound it three times, same result. I'm thinking I should have purchased a different string trimmer.
Ответитьif that power does not work at all like fails to let string out when you tap on ground . Stop working all together , Can buy a replacement put a new on the shaft ?
ОтветитьWow, thank you so much. I was about to give up, but,...... of course there is You Tube.
Such a simple and obvious issue, and so easy to fix
Thank you again.
You saved me a ton of headache! Thank you!
ОтветитьThanks, I thought I was going to have to buy a new trimmer.
ОтветитьYou saved me so much frustration and neighbors didn’t have to hear my sailor’s mouth. Thank you.
ОтветитьThis is excellent guidance for a problem that was driving me mad. Thank you so much. Why doesn't the manual cover this? Hello. Ego?
ОтветитьYou saved my bacon (a whole lot of time, inconvenience and frustration). Thanks for posting!
ОтветитьThat was it thanks. I had fibers from an old tarp wrapped up inside ans it was driving me nuts
ОтветитьThe black piece under the nut on mine spins. Holding the Green part does nothing to facilitate loosening nut. Is that another problem? I've yet to be able to loosen nut by holding the green thing..and I haven't been able to hold the black piece on top well enough to break it loose. Please let me know if I'm missing something? Thank you so much for the video…
ОтветитьThanks. Fixed my problem straight away.
Ответитьthank you so much!! i was just about to jetison this weedwhacker into the sun!! 5 minutes later ,and its finally working! thank god it survived getting whipped into the side of the shed last weekend!! god i feel stupid!! lol thanks again!
ОтветитьThis worked! Thank you.
ОтветитьThank you!
ОтветитьPerfect video! Fixed mine as soon as I got hone from work I was so excited 😂 kudos!
ОтветитьHas anybody had the issue of it just unwinding while you’re using it? The string winds in just fine, but when I use it, it unwinds.
ОтветитьThanks for posting this! Super helpful. That nut can be a little recalcitrant so WD-40 will handle the resistance.
ОтветитьI followed instructions and this worked for 20-30 minutes then had string on one side so took it out and tried to reload. It didn’t work so took all apart again, no obstruction out back together and won’t load, it clicks like it wants to but it’s not working any second steps?! I would love a response. Thanks!
ОтветитьThank you! Now to run outside and give this a try!
ОтветитьJust what I needed. 5 min job. Easy fix. Thank you!
ОтветитьExcellent video, 5 minutes to fix, like new….thank you!
ОтветитьThank you! Worked like a charm!
ОтветитьMy ST1520 Trimmer had no debris. Line feed does not work.
ОтветитьThank you so much!!!!
ОтветитьMine is clean inside- still does not work?
ОтветитьPlain and simple you are the best brother! Wow i did as you suggested and it worked great and Thank You ,and may the Lord bless you !
ОтветитьRespect for the video, I can’t remember anything being so simple for me 👍🏻
ОтветитьRight on. I thought that I might be buying a new head. Thanks a bunch.
ОтветитьThank you. That was the problem
Ответить