XP-58 Thermal printer repair - I'm the only one getting these kind of repairs?

MAGIC fingers

Welcome to my world Sorin. I would replace the capacitors and unit would still come back from customer. There are ghosts in my workshop. Evil ghosts.

Fantastic 😂😂😂❤

Condensatorii pe iesirea de 12v sunt uscați, aveai 11,2v cu fluctuații de tensiune...eu zic să îi schimbi. Alimentarea cu 12v de la sursă a reactivat c _ urile pentru o perioadă de timp și se va reîntoarce la reparație. O zi bună!

Heppend alot with me when its start working again suprisely

👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽 Something new to explore ! Who knew thermal pads could have so many uses! :)

Magic touch did it again...🤣🤣🤣

I would give the customer a 10 minute/10 foot warranty. After 10mins, or once the device is more than 10 feet away from you, the warranty is over!

…will haunt you forever 👻👈😅

I'm Epson repair Center. Pressing the feed button may print a test.

Customer came with no power. We check and nothing. Only one Time one customer came two times in 3 days and the second time the printer does not work.

nice

11V output?? Should it be 12V and thus weak sec output Caps maybe and barely got it going and sometimes on and sometimes wont start the printer maybe?

The secret to opening the AC adapter boxes are dropping a few drips of gasoline in the crack
wait 30 seconds and itll pop right off....then use hot glue to reseal

Ask the owner how he tested it before he brought it for repair? My guess is he tried different outlets but never checked the cable going into the printer. I am guilty of always doing the brue force repair only to find out that I forgot to check the fuse first or even switch on the thing. Or worse, to even test the outlet for power.

The boxes, like this, I opens using the hummer. Position of the box should be the same as on video, when you using the screwdriver. better to do it on the flore or heavy stable surface.

Why you did not apply the hot glue when finished with the power supply box? ((

Hi Sorin, the simplest and safest way to to open those kind of boxes is to use gasoline on the joint part which will weaken the plastic and melt the glue. and after 30 sec you can open it by your bare hands and without tools. 🙂

the plug where ever they pluged it was maybe not working

You're not the only one ;). I have calls from garages, even private customers which are all electronics repairs as we're the only electronics repair shop in our area. So, we have even now 4moms Mamaroo ;) in repair.

You could at least to remove a capacitor :)))

I have had so many jobs where I had to fix something fully functional lol I usually will hold it for a day or so if I can to thoroughly test it and make sure that there's nothing wrong with it.

it happened so much times to me with laptops dead not working at all and all tre sudden it start working better than before :D LOL or car radio same I had one taken all screws out I was like ok lets take wires out lets try to see whats happening and all good job done! :D LOL just pure MAGIC!

It may about broken copper wire inside the cord.
if a device not working i always check the power cable first, then adaptor output value without any cable moving.
You can catch the broken wire while problem live.
But if you move the cables, copper wires may start to connection and you cant catch it beacuse of plastic coats.

I have had 2 computers that did not turn on . I pulled all the connectors and reconnected and fixed ????????

Easiest repair ever the switch on the power supply was off no charge .

could be a frozen Bio haha

It happened to me twice. First with a LCD monitor and then with a credit card handheld terminal. I never knew what was wrong in the first place...

Hit it with elastic hummer

Open the power casing easier using acetone

😂😂😂

😊😊😊Bet you it's the on-off rocker switch.

Problem will come back. Replace the output caps!

Yes. Yes you ARE the only one that gets these jobs. I repaired a woman's large electric toy during covid - she said "Amazon is out of stock".

Weird intermittent fault maybe? I'd replace the startup cap typically 47 or 33uf 25v and just give it him back. Customer is the best tester. (and the worst)

Condensatorii sunt dusi! Am intanit de multe ori. I-am scos i-am masurat si aveau chiar si pe capacimetru valoarea corecta 😂😂 dupa ceva timp iar s-a repatat defectul. Dupa ce am schimbat condensatorii totul s-a rezolvat! 😁 numai bine si mult succes cu canalul in continuare 😁 salutari din Romania

LOL, the fault is may be power condenser or drying of power board. You hammered it for connecting, but will be disconnecting in further using

Every PSU open with zippo gas for lighters - pour just a little drop on conection joint. It open easy as a can in 2 minutes.

guess the power supply did not deliver enough to charge the capacitors first. just low on power for some reason

Just cause he cheap charge him double 🤣

My first ever electrical repair was my mother's hair dryer, when I was about 10 years old. It did not heat up and the fan did not run. I opened the case (not having a clue what I was doing), gave it a severe looking at, blew out some dust and screwed it back together. Lo and behold, it worked and continued to work for another 20 years!
That was the day I realised I had magic fingers! 🤣🤣🤣

A few years back at work, we had a ceiling mounted data projector in the main school hall that was dead. We had to get our scaffold tower to get to it. My boss was about to spend £2,000+ to replace it as it's a very high lumens model that projects on to a very large screen on the stage. I said before you send off the order for a replacement let me take a look... well I opened it up, took it all apart and had a good look around and could see nothing wrong so I put it all back together, plugged it in and low and behold! It was working again and I had done nothing other than take it apart and put it back together again! It went back up the scaffolding tower, connected back up to the ceiling bracket and it has been fine ever since!!

hellloo i learn many things from You just start this channel :D You are a... real person not like many "celebrites" :D Appreciate this !

i have small question what camera is from top ? on this movie ?

You have made a so called hard reset

im finding ribbon or ink . but im failed